Types of Accidents in an Auto Shop

When we talk about the Types of Accidents in an auto body shop, there are numerous combustible substances (gasoline, oily rags, paints, thinners) found in an automobile workshop. Gasoline is by far the most dangerous and underrated flammable in an auto shop. Do not put oil absorbent (dry oil) on gasoline because the absorbent will become highly flammable.

Every workplace injury can create a ripple effect on the efficiency of your auto shop. If your best mechanic is injured and out of work for several months, you not only lose your productivity level; you could incur higher medical costs, wage replacement, damaged machinery repairs, and higher workers’ compensation costs.

Types of Accidents

You can keep your workers safe by educating them about the most common Types of Accidents in the auto shop, providing regular training, and requiring them to follow important safety procedures. The Occupational Safety and Health Administration (OSHA) provide detailed information on standards online that can help you keep employees safe and comply.

Being in a car accident is one of the worst feelings, especially if it is your fault. In addition to the fact that you have to manage the harm to your vehicle, however you likewise need to manage the harm to the next individual’s vehicle or whatever it hits), as well as the embarrassment and frustration of having a car accident in the first place.

We have compiled a quick guide to the six most common types of car accidents

6 Types of Accidents Occur in auto Body Shop

Here is a list of different Types of Accidents Occurring in Auto Body Shop.

  • Mechanical injuries
  • Repetitive motion injuries
  • Slip and falls
  • Dust particles and chemical exposure
  • Heavy Lifting
  • Chemical Burns

So let’s start to learn it in detail…

Mechanical injuries: Types of Accidents

Mechanical injuries Types of Accidents

Body shop professionals often work with winches, sprayers, compressors, traction chains, and various other tools and equipment. Each kind of hardware incorporates mechanical parts, for example, sprockets or pinion wheels that can cause genuine injury.

Common mechanical injuries include crushed hands, cut fingers, cuts, lacerations, and burns. Bodywork workers should wear PPE (personal protective equipment) to protect against mechanical hazards.

Manufacturers should provide adequate training to workers on the safe use of mechanical equipment in the body shop.

Repetitive motion injuries

Repetitive motion injuries

Repetitive motion injuries occur when body shop workers repeatedly put physical stress on a particular body part. Tendonitis, carpal tunnel syndrome, bursitis, and trigger finger are some of the common repetitive motion injuries that auto body (5 Common Auto Body Repairs) shop workers can suffer.

For example, the repeated action of manually turning a screwdriver will place continuous stress on the worker’s wrist.

Employers should organize job rotation, provide frequent breaks for these types of workers doing repetitive motion work, and bring in a physical therapist to teach these workers to perform daily stretching exercises so that they stay healthy in the long run.

Slips and falls: An Auto Body Shop

Slips and falls Types of Accidents

Sometimes the floor of an auto body shop can have spilled paint, grease, or other liquids. This puts bodywork workers at increased risk for slips and falls. According to OSHA, slips, and falls cause 15 percent of all workplace deaths.

Slips and falls can also lead to bruises, fractures, broken bones, concussions, and other injuries. Employers should ensure that any spills on the auto body shop floor are cleaned up immediately, wet floor areas are marked with clear caution signs, and aisles are kept clutter-free.

Workers operating in the body shop must also wear special footwear (or wear appropriate footwear) that has non-slip soles to prevent slipping and falling.

Dust particles and chemical exposure

Dust particles and chemical exposure

Body shop workers often work with primers, paints, caulks, and polishes. They likewise work hardware that produces dust and other fine particles. Over the long run, these destructive openings can harm the skin, harm the eyes, and cause respiratory issues.

Auto body retailers should furnish auto body shop laborers with gloves, paint suits, and respirators depending on the situation. They must also ensure that the installation is properly ventilated to avoid the accumulation of fumes and dangerous particles.

Heavy lifting: Greater Risk for Developing

Heavy lifting Types of Accidents

Activities that involve heavy lifting can put bodywork workers at greater risk for developing muscle sprains, strains, and back injuries. Employers must ensure that these workers are training improper lifting techniques to minimize these types of injuries.

Bodywork workers must be trained to carry a heavy load close to their body and not far from the body. Employers must ensure that loads that are too heavy to be moved by individual workers are lifted by multiple workers, or they must provide a dolly, hoist, or another device to carry such a load.

Chemical burns: Auto shop workers

Chemical burns Types of Accidents

Auto shop workers often handle dangerous and flammable liquids in their daily work. Make sure these chemicals are properly labeled following the Occupational Safety and Health Administration (OSHA) guidelines. Labels are required to have a pictogram; hazard and caution statements; a word of warning, such as “danger”; the product name and supplier identification. They should also include safety handling information and what to do in case of exposure.

Containers around the store should be checked routinely to make sure the lids fit tightly and that there are no leaks or deterioration. Workers should always wear protective glasses and gloves when handling chemicals.

Conclusion Types of Accidents

I have previously talked about all the accidents that happen in the auto body shops, read it deeply and increase your knowledge about these injuries. By instructing your staff and executing particular security methods, you are proactively decreasing the probability of a worker being harmed in your shop.

Mathew Log

Expert for JautobodyShop (5 years+ Experience).
View All Articles

Leave a Reply

Your email address will not be published. Required fields are marked *